Hafele 003.15.016 Titebond II

• APPLICATION GUIDELINES Application temperature: Above 55°F Assembly time after glue application: 5 minutes (70°F/50% RH) Minimum required spread: 7 mils (typical) Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods). Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing application. Cleanup: Damp cloth while glue is wet. Scrape off dried excess. BOND STRENGTH ASTM D-905 (On Hard Maple) Temperature Strength psi % wood failure Room Temperature 3,750 72 150° Overnight 1,750 6 LIMITATIONS Passes ANSI/HPVA Type II water-resistance tests. Do not use for joints below the waterline or continuous submersion. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. KEEP FROM FREEZING Note Chalk temperature indicates the lowest approximate temperature at which the glue, air or materials to be bonded may be to assure a good bond.
• Designed for exterior use
• Easy cleanup with water
• Excellent heat and solvent-resistance
• FDA approved for indirect food contact (i.e. cutting boards)
• Ideal for radio frequency (R-F) and Hot press gluing systems

Resources

• Titebond II Premium Wood Glue Specifications