Hafele 003.15.081

• APPLICATION GUIDELINES Application temperature: Above 50°F Assembly time after glue application: 5 minutes (70°F/50% RH) Total assembly time: 15 minutes (70°F/50% RH) Minimum required spread: Approximately 6 mils or 250 square feet per gallon. Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods) Methods of application: Plastic bottles for fine applications; glue may also spread with a roller spreader or brush. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. BOND STRENGTH ASTM D-905 (On Hard Maple) Temperature Strength psi % wood failure Room Temperature 3,600 77 150°F Overnight 1,600 10 LIMITATIONS Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Not FDA approved for indirect food contact. Read MSDS before use. NOTE: KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN
• Designed for interior and exterior applications
• Easy clean-up with water
• Excellent sandability
• Formulated for darker wood
• Ideal for radio frequency (R-F) gluing systems
• Ideal for wood, hardboard, particleboard, leather, cloth and most porous materials
• Passes ANSI Type II water-resistance
• Same superior performance as Titebond® II Premium Wood Glue
• Unaffected by finishes

Resources

• Titebond II Dark Wood Glue Specifications