Richelieu 706SP0212205171 Round Double-Point Support System for Glass Railing
This system is used in several applications such as the perimeter of a terrace or the railing of a balcony.
Using the same principle as the fixing spacers for glass, this system allows the installation of glass panels on the facade.
The brackets fixed to the wall plate allow the glass to be moved away from the surface.
Excellent corrosion resistance for use in all outdoor installation projects.
Advantages and benefits
Allows the glass panel to be installed parallel to the front of the balcony.
Can be attached to different substrates using the right anchors.
Suitable for several thicknesses of glass.
For safety purposes, use tempered glass.
The use of power tools during installation may damage the hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration.
Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice.
Always use the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers.
The customer may in no case make a claim following the use of these documents.
The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must be done by qualified personnel.
Front mounting with two fixing points
Drilling the glass required for use
Install the wall plate directly to the substrate, then install the supports, the glass and finalize with the caps.
1 support system and mounting hardware
Ship via: Can Ship UPS
Color/ Finish: Polished Stainless Steel
Diameter: 50 mm
Height: 203 mm
Load Capacity for Four Brackets: Max. 90 kg
Load Capacity for Two Brackets: Max. 45 kg
Manufacturing Material: Stainless Steel: Duplex 2205
Milling C/C: 100 mm
Milling Diameter: 20 mm
Mounting Side: Reversible
Panel Height: Max. 1 200 mm
Panel Width: Max. 2 000 mm
Product number: 706SP0212205171
Recommended Location Usage: Interior, Exterior, Coastal
Safety Glass Thickness: 12 to 15 mm
Type of Mounting: Face Mount
Unit 1: case - 4
Width: 100 mm