Richelieu HR10210000000 Square Glass Clamp for Flat Mounting - Model 21
Designed for posts with flat bases.
Advantages and benefits
Increases glass stability when used with double-sided adhesive tape or when adding clamps at the bottom of the glass panel. Ideal for designing partitions, windshield screens or glass balustrades without handrails.
For safety purposes, use tempered glass.
The use of power tools during installation may damage the hinges and decorative hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always use the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may in no case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnel. Always make sure that the product is properly installed using suitable fixings to the support material. Never exceed the load or maximum size recommended by the manufacturer. Never use a spray lubricant on this product.
Accepts M8 or similar mounting screws. Zinc clamps are meant for interior use only and stainless steel clamps are for exterior use. The glass panel must respect the maximum dimensions of 800 mm x 1,000 mm (31-1/2" x 39-3/8").
Pair of rubber holders for 6 mm (1/4") thick glass, as well as a pair for 10 mm (3/8") thick glass.
Lock pin not included.
Ship via: Can Ship UPS
Balustrade Post Type: Square Tube
Color/ Finish: Stainless Steel
Height: 45 mm
Length: 45 mm
Manufacturing Material: Zinc
Milling Diameter: 8.5 mm
Product number: HR10210000000
Recommended Location Usage: Interior
Safety Glass Thickness: 6 to 10 mm
Thickness: 28 mm
Type of Mounting: Square Post-Tube
Unit 1: case - 40